|
1/2X12BB, Base Bolt for BPH25G
|
$16
|
||
|
3/4X12PP, Pier Pin for BPC25G
|
$12
|
||
|
25AG2, Sleeve Top Section
|
$179
|
||
| 25AG4, Flat Top Section |
$169
|
||
|
AS25G, Rotor Plate
|
$59
|
||
|
BAS25G, Bearing Accessory Shelf
|
$299
|
||
|
BPC25G, Fixed Concrete Base Plate
|
$69
|
||
|
BPH25G, Hinged Concrete Base Plate
|
$229
|
||
|
BPL25G, Bearing Plate
|
$159
|
||
| EB2525G, Eave Bracket |
$85
|
||
| EP2534-3, Equalizer Plate (3-hole) |
$36
|
||
| EP2534-5, Equalizer Plate (5-hole) |
$49
|
||
| GA25GD, Guy Assembly |
$119
|
||
| GAR30, Concrete Guy Anchor Rod |
$39
|
||
| HB25AG, House Bracket (0–15") |
$99
|
||
| HB25BG, House Bracket (0–24") |
$139
|
||
| HB25CG, House Bracket (0–36") |
$139
|
||
| SB25G, Short Base Section (40") |
$69
|
||
| SB25G5, Short Base Section (60") |
$99
|
||
| SBH25G, Hinged Short Base Section (40") |
$219
|
||
| TB3, Thrust Bearing (2") |
$149
|
||
| TB4, Thrust Bearing (3") |
$169
|
||
| UHF25G, Antenna Mounting Bracket |
$39
|
||
| WP25G, Work Platform |
$139
|
| 25G Midsection |
$109
|
The Rohn 25G tower is a popular choice for large VHF/UHF antennas and medium sized HF antennas. The tower is a 12" face triangular design using 1-1/4" steel legs and continuous 5/16" steel rod bracing. Middle sections measure 10 feet long, top sections are approximately nine. Sections fit together with a double-bolted joint. The tower is a guyed design; three anchors spaced radially 120° apart, are set out from the base 80% of the tower height. A wide variety of optional sections and options make the 25G an extremely versatile tower. The sections are supplied with nuts and bolts.
DANGER
No Tower is self supporting during construction! Always use temporary guys on the top most section, and install permanent guy wires as soon as a guy point height is reached.
