| 55G Midsection |
$289
|
The Rohn 55G tower is an extra heavy duty 18" face triangular design using 1.5" steel side rails and solid steel 7/16" cross bracing. Middle sections mease 10 feet long. Sections fit together with a double bolt joint for strength. The tower is designed to use three guy points radially spaced 120 degrees apart, with anchors set out from the tower 80% of the tower height. All 55G tower sections and optional accessories have a hot dipped galvanized finish to assure years of trouble-free service. Sections are supplied with galvanized nuts and bolts.
|
3/4X12PP, Pier Pin for BPC55G
|
$12
|
||
|
AS455G, Rotor Plate
|
$119
|
||
|
BPC55G, Fixed Concrete Base Plate
|
$189
|
||
|
BPL55G, Bearing Plate
|
$499
|
||
|
EP2534-3, Equalizer Plate (3-hole)
|
$36
|
||
| EP2534-5, Equalizer Plate (5-hole) |
$49
|
||
| GA55GD, Guy Assembly |
$239
|
||
| GAC3455, Guy Anchor |
$129
|
||
| GAR30, Concrete Guy Anchor Rod |
$39
|
||
| HBUTVRO, Adjustable House Bracket |
$229
|
||
| SB55G, Short Base Section (60") |
$169
|
||
| TB3, Thrust Bearing (2") |
$149
|
||
| TB4, Thrust Bearing (3") |
$169
|
||
| WP55G, Work Platform |
$239
|
DANGER
No Tower is self supporting during construction! Always use temporary guys on the top most section, and install permanent guy wires as soon as a guy point height is reached.
